High density polyethylene (HDPE) is a white powder or granulated product. Non-toxic, odorless, crystallinity 80%~90%, softening point 125~l 35°C, normal use temperature up to 100°C; hardness, tensile strength and creep are better than low density polyethylene; wear resistance Good electrical insulation, toughness and cold resistance; good chemical stability, insoluble in any organic solvent at room temperature, corrosion resistance to acids, alkalis and various salts; low permeability to water vapor and air, low water absorption.
Its main advantages are acid and alkali resistance, organic solvent resistance, good electrical insulation performance, good low temperature toughness, and little change in surface hardness, tensile strength, rigidity and other mechanical strength.
Since the above various advantages of HDPE materials are very well matched with the pontoon products in our hearts, this raw material is widely used to produce the floating cubes pontoons. In order to ensure the quality of our products, our company uses imported high-quality raw materials for the production and processing of our products. We are willing to use our best efforts to ensure and meet the quality requirements of our customers.
We,Hiking Marine, produces floats with HMWHDPE, a high molecular weight, high-density synthetic material. The floats made from this new environmentally friendly material are of the highest quality. At the same time, UV-resistant substances are added to ensure sufficient toughness, hardness and natural environment. Changes and corrosion of seawater, and will not cause pollution or harm to the marine environment. The high-quality floats produced with this environmentally-friendly material can be used with confidence in the freshwater or salt water fields of various rivers and lakes.
Our conventional products are tested to meet the following quality requirements:
Float cube eye ring : Can withstand 1.8 tons of heavy load (18KN) for 30 minutes.
Pressure on the side of a single pontoon cube: 50/KN (load bearing at static load)
Tensile strength 25.0MPIZOD
Impact strength: 207J/MPH value: It can adapt to the environment with pH value within 3-9, except for strong acid and alkali.
The life of the float is more than 15 years.
General product specifications:
Buoy size: 500mm*500mm*400mm
Unit float weight: 7 kg ± 0.3 kg
Carrying capacity: 350 kg/m2
Material: High molecular weight high density polyethylene (HMWHDPE)
Adapt to temperature: -60 ° C / +80 ° C
Our large-scale production of pontoon products has been widely applied to aquaculture, floating platforms, sea swimming pools, observation decks on water, large-scale floating water platforms, floating restaurants, etc. Due to the reliable guarantee of raw materials and product quality, over the years has been recognized by a large number of customers, you can rest assured that our colleagues Joisen ,he can provide you more product details and price concessions. Contact visa joisen@foxmail.com
Post time: 2019-08-03 09:21